Draft cover 2005 - COSCAP-NA

Draft cover 2005 - COSCAP-NA

Information requested following SMS implementation presentation Information requested following SMS implementation presentation Discussion at the last COSCAP-NA meeting lead to requests for the following additional details: 10.3 information on methods used for determining acceptable levels of safety; 10.4 guidance material for manufacturers to support implementation of SMS; and 10.5 checklists used to support oversight on ATM service providers. 2 RDIMS/SGDDI 10.3 Information on methods used for determining acceptable levels of safety

Safety is not an absolute condition There will always be risks Need to manage risks to an acceptable level to prevent accidents 3 RDIMS/SGDDI 10.3 Information on methods used for determining acceptable levels of safety; Example: regulatory reference for Level of Service applies to ANS - Canadian Civil Aviation Regulation 806.02(1) requires ANS service provider to notify the Minister of intent to terminate or reduce a level of service. Minster then has the right to require the ANS service provider to complete an Aeronautical Study before any proposals are implemented

4 RDIMS/SGDDI 10.3 Information on methods used for determining acceptable levels of safety; Aeronautical Study Voluntary process follows Canadian Standards Association CAN/CSA Q850 Risk Management: Guideline for Decision Makers. - Fundamental principles are: - Consultation with Stakeholders - Identification of Risk and proposed Mitigation - Documentation - Pending approval by the Department of Justice, Part VIII of the

CARs will be amended to clarify this as a regulatory requirement 5 RDIMS/SGDDI 10.3 Information on methods used for determining acceptable levels of safety; Reference documentation - Risk Management and Decision Making in Civil Aviation TP 13095 (03/2001) available on line at http://www.tc.gc.ca/CivilAviation/Publications/menu.htm#publications - Canadian Standards Manual available on line at http://www.csa-intl.org/onlinestore/welcome.asp - Information from NAV CANADA on this topic and their level of service policy can be found at: http://www.navcanada.ca/NavCanada.asp?Language =en&Content=ContentDefinitionFiles\Services\ ANSPrograms\LevelOfService\default.xml

6 RDIMS/SGDDI 10.4 Guidance material for manufacturers to support implementation of SMS Regulations for manufacturers were tabled in Jan 2007 - expected to be published in about 2 to 3 years - requirements will be exactly the same as for all of Part 5 (Airworthiness) and Part 7 (Commercial Air Services) Guidance material for Part 5 and Part 7 is in the process of being revised to apply to all operators/manufacturers: Reference document is TP 13881, Safety Management Systems for Flight Operations and Aircraft Maintenance Organizations - Guide to implementation 7 RDIMS/SGDDI

10.4 Guidance material for manufacturers to support implementation of SMS Additional Guidance on SMS Assessment - TP 14326 is the primary assessment protocol reference for T.C. Delegated Inspectors - Covers components and elements of the Civil Aviation SMS model - Expectations have been developed for each element along with associated questions and evaluation criteria -Reminder that case specific protocol will vary depending on the company being assessed Web link http://tcinfo/civilaviation/maintenance/TP14326/Introduction.htm 8 RDIMS/SGDDI 10.5 Checklists used to support oversight on ATM service providers.

- Air traffic management. The aggregation of the airborne tions and ground-based functions (air traffic services, airspac agement and air traffic flow management) required to ensur and efficient movement of aircraft during all phases of opera Communications, Navigation and Surveillance. Air Traffic Services (ATC and FSS) 9 RDIMS/SGDDI 10.5 CNS Checklists used to support oversight on ATM service providers. Authority CAR 802 - Establishes Standards

incorporates by reference Annex 10 - Requires - records - training/certification Oversight - Frequency of Inspection Policy - Safety triggers - AORs and CADORs - TC/NAVCAN Safety Oversight Committee 10 RDIMS/SGDDI 10.5 ATM Checklists used to support oversight on ATM service providers. Authority

- CAR 802 - Refinement through pending NPA has CARAC approval to describe procedures and standards Oversight - Safety triggers - AORs and CADORs - TC/NAVCAN Safety Oversight Committee 11 RDIMS/SGDDI 10.5 Checklists used to support oversight on ATM service providers ATS Authority CAR 801 - Links to Standards in CAR 821 (Domestic) and Chapter 3 of Annex (International)

- Mandates requirement for site manual to document provision of service Oversight - Frequency of Inspection - Safety triggers - AORs and CADORs - TC/NAVCAN Safety Oversight Committee RDIMS/SGDDI 12 NAV CANADAs Safety Management System Safety Philosophy accidents are organizationally based and as such SMS must integrate technical and operational systems with financial and human resource management Safety Policy Level Safety Objective

Safety Priority to reduce safety risks resulting from the provision by NAV CANADA of air navigation services and products to a level as low as reasonably achievable safety is afforded the highest priority over commercial, operational, environmental or social pressures Safety Planning

Operational Risk Management Safety Responsibility Safety Management everyone has a responsibility to contribute to the achievement of the safety goal proactive, systematic, explicit and coordinated

management of safety risks Exchange of Safety Information Safety Performance Measurement Safety Management Assurance 13 RDIMS/SGDDI

Recently Viewed Presentations

  • Global Ocean Monitoring: Recent Evolution, Current Status, and

    Global Ocean Monitoring: Recent Evolution, Current Status, and

    Global Ocean Monitoring: Recent Evolution, Current Status, and Predictions Prepared by Climate Prediction Center, NCEP December 7, 2010 http://www.cpc.ncep.noaa.gov ...
  • Welcome Pitching Explained: Structure and practice for a

    Welcome Pitching Explained: Structure and practice for a

    The overview statement (of course) How, in detail, does the solution work? Describe traction, validation, customer testimonials, etc. Cover Potential objections and practice Q/A Revenue or promise of revenue!
  • THE ART and life of BRaque:

    THE ART and life of BRaque:

    the portuguese: artist- georges braque material- oil on canvas stylsitic characteristics- 1. cubism 2.
  • Revelation Worthy is the Lamb who was slain

    Revelation Worthy is the Lamb who was slain

    Revelation. Worthy is the . Lamb who was slain. Holy, holy is He. Sing a new song . to Him who sits on. Heaven's mercy seat. Worthy is the . Lamb who was slain. Holy, holy is He. Sing a...
  • Health and Safety: Overview - USDA

    Health and Safety: Overview - USDA

    Health and Safety. Overview. Adapted from the FAD PReP/NAHEMS Guidelines: Health and Safety (2011) During an animal health emergency response, ensuring the health and safety of responders will be essential. Specific hazards encountered during a response may vary depending on...
  • A Counselor Performance Evaluation Instrument: Counselor Keys ...

    A Counselor Performance Evaluation Instrument: Counselor Keys ...

    A Counselor Performance Evaluation Instrument: Counselor Keys Effectiveness System (CKES) Julie Hartline, Cobb County School District. Robin Zorn, Gwinnett County Public Schools
  • Title

    Title

    Complete aid file and unsatisfied requirements Read and accept Terms & Conditions Accept your awards in OASIS Complete MPN & Entrance Interview if loans are accepted Next Steps (continued) Pay close attention to emails you receive/keep email address current in...
  • Public Sector Economics Explaining Government Behavior Positive and

    Public Sector Economics Explaining Government Behavior Positive and

    Public Sector Economics Explaining Government Behavior * * * * Positive and Normative Interact The optimal policy may have to account for political reactions SSA chairman: "a program for the poor is a poor program" merit goods and tax incidence...