Chapter 3 Objectives - Sabbir Saleh

Chapter 3 Objectives - Sabbir Saleh

Chapter 3 Computer Assembly Chapter 3 Objectives 3.1.1 Open the case 3.1.1 Install the power supply 3.1.2 Attach the components to the motherboard and install the motherboard 3.1.3 Install internal drives and drives in external bays 3.1.4 Install adapter cards 3.1.5 Install and connect all internal cables 3.1.5 Re-attach the side panels and connect external cables to the computer 3.2.1 Boot the computer for the first time

3.2.2 Configure BIOS Chapter 3 Objectives 3.3 Describe reasons for upgrading computer components 3.3.1 Select and install replacement or upgraded motherboard, CPU, heat sink and fan, and RAM 3.3.1 Upgrade and configure BIOS 3.3.2 Select and install replacement or upgraded hard drives 3.3.3 Select and install replacement or upgraded input and output devices Open the Case Computer assembly is a large part of a technician's job.

Prepare the workspace before opening the computer case. There are different methods for opening cases. Consult the user manual or manufacturer's website. Install the Power Supply Power supply installation steps include the following: 1. Insert the power supply into the case. 2. Align the holes in the power supply with the holes in the case. 3. Secure the power supply to the case using the proper

screws. Attach Components to the Motherboard CPU on Motherboard The CPU and motherboard are sensitive to electrostatic discharge. The CPU is secured to the socket on the motherboard with a locking assembly. CAUTION: When handling a CPU, do not touch the CPU contacts. Thermal compound Helps keep the CPU cool. To install a used CPU, clean it and the base of the heat sink with isopropyl alcohol to remove the old thermal compound.

Heat Sink/Fan Assembly The Heat Sink/Fan Assembly is a two-part cooling device. The heat sink draws heat away from the CPU. Install RAM RAM provides temporary data storage for the CPU and should be installed in the motherboard before the motherboard is placed in the computer case. The Motherboard After installing the previous components, the motherboard is now ready to install in the computer case.

Plastic and metal standoffs are used to mount the motherboard and to prevent it from touching the metal portions of the case. Install Internal Drives Drives that are installed in internal bays are called internal drives. A hard disk drive (HDD) is an example of an internal drive.

HDD installation steps: 1. Position the HDD so that it aligns with the 3.5-inch drive bay. 2. Insert the HDD into the drive bay so that the screw holes in the drive line up with the screw holes in the case. 3. Secure the HDD to the case using the proper screws. Install Drives in External Bays

Drives in external bays allow access to the media without opening the case. Some devices that are installed in this type of drive are: An optical drive is a storage device that reads and writes information to CDs, DVDs, or BDs. A floppy disk drive (FDD) is a storage

device that reads and writes information to a floppy disk. Install Adapter Cards Adapter cards are installed to add functionality to a computer. Some examples of these adapters are: A Network Interface Card (NIC) which enables a computer

to connect to a network. It uses PCI and PCIe expansion slots on the motherboard. A wireless NIC enables a computer to connect to a wireless network. Wireless NICs use PCI and PCIe expansion slots on the motherboard. Some wireless NICs are installed externally with a USB connector. A video adapter card is the interface between a computer and a display monitor. An upgraded video adapter card can provide better graphic capabilities for games and graphic programs. Video adapter cards use PCI, AGP, and PCIe expansion slots on the motherboard. Connect Internal Cables Power cables are used to distribute electricity from the

power supply to the motherboard and other components. ATX AUX SATA Molex Berg Connect Internal Cables Data cables transmit data between the motherboard and

storage devices, such as hard drives. Some of examples of this type of cables are: PATA cable SATA cable Floppy drive data cable Additional cables connect the buttons and link lights on the front of the computer case to the motherboard. Complete Physical Installation Now that all the internal components and the power supply have been installed and connected to the motherboard, the following tasks should be completed:

Re-Attach the side panels: Most computer cases have two panels, one on each side. Some computer cases have one three-sided cover that slides down over the case frame. Connect the External Cables: These cables are normally connected to the back of the computer. Here are some common external cable connections: Monitor, Keyboard, Mouse, USB, Ethernet, Power. Boot Computer for the First Time When the computer is booted, the basic input/output system (BIOS) will perform a power-on self test (POST) to check on all of the internal components. The BIOS contains a setup program used to configure settings

for hardware devices. The configuration data is saved to a special memory chip called a complementary metal-oxide semiconductor (CMOS) or can be saved in nonvolatile memory which does not need power to retain settings. POST checks to see that all of the hardware in the computer is operating correctly. If a device is malfunctioning, an error or a beep code alerts the technician that there is a problem. BIOS Configuration Technicians use the BIOS information to learn about installed components:

CPU Manufacturer and speed RAM - Manufacturer and speed Hard Drive - Manufacturer, size, and type Optical Drive - manufacturer and type Technicians use BIOS to:

Set Time and Date Disable Devices Set Boot Order Adjust Clock Speed Enable Virtualization BIOS Configuration Technicians can set the following BIOS security features BIOS passwords Drive encryption Trusted Platform Module (TPM) Lojack Lock the computer remotely.

Display a message so that a lost computer can be returned to the owner. Delete sensitive data on the computer if stolen. Locate the computer using geotechnology. BIOS Configuration Bios Built-in Hardware Monitoring Temperatures Fan Speeds Voltages Clock and Bus Speeds Intrusion Detection Built-in Diagnostics Start test, Hard drive test, Memory test

Motherboard Component Upgrades If the motherboard is upgraded or replaced, the CPU may need to be replaced CPU architectures are installed in these common socket connection designs: Zero-Insertion Force (ZIF) Land Grid Array (LGA)

Pin Grid Array (PGA) Single-Edge Connector (SEC) no longer commonly used Low-Insertion Force (LIF) - no longer commonly used Upgrading the CPU The new CPU must: fit into the existing CPU socket. be compatible with the motherboard chipset. operate with the existing motherboard and power supply. must operate with the existing RAM. The RAM may need to be upgraded or expanded to take advantage of the faster CPU. might require a different heat sink and fan assembly.

Upgrading RAM Prior to upgrading or replacing the RAM, answer the following questions. What type of RAM does the motherboard currently use? Can the RAM be installed one module at a time or must it be grouped into matching banks? Are there available RAM slots? Does the new RAM chip match the speed, latency, type, and voltage of the existing RAM? BIOS Motherboard manufacturers periodically release updates for their BIOS. Modern BIOS chips are EEPROM, or flash memory,

which can be upgraded by the user without opening the computer case. This process is called flashing the BIOS. Flash the BIOS through a command prompt. Several motherboard manufacturers provide software that allow a user to flash the BIOS from within Windows. Storage Devices Reasons for installing an additional drive:

Install a second operating system Provide additional storage space Provide a faster hard drive Hold the system swap file Back up the original hard drive Increase fault tolerance When two PATA hard drives are connected to same data cable, one drive must be jumpered as the master, other drive must be jumpered as the slave drive. Each SATA hard drive has its own data cable, therefore, there is no masterslave relationship between drives

RAID A Redundant Array of Independent Disks (RAID) installation can provide data protection or increased performance when connecting multiple hard drive. Input and Output Devices Replacement and/ or upgrade examples: Change to an Ergonomic keyboard or mouse Add privacy and antiglare filters to a monitor Add additional monitors Use the existing expansion slots or sockets. May use a USB connection.

Add USB connections by installing a USB adapter card or add a USB hub. Install drivers if necessary. Chapter 3 Summary Computer Assembly Installation of all computer components Connection of all cables Description and configuration of BIOS Description of POST Upgrading and Configuring a PC Motherboard and Related Components Storage Devices Input and Output devices

Recently Viewed Presentations